-40%
Sharp 488nm GH04850B2G 55mW 12mm Copper Laser Module W/Driver and Lens Options
$ 47.52
- Description
- Size Guide
Description
Listing is for a single 55mW Sharp 488nm GH04850B2G diode in 12mmX30mm copper module W/Flexdrive V5 laser driver and choice of glass lens.Perfect for running off a single 3.7V Li-Ion or a 5V 1A wall adapter. The Flexdrive Laser Driver is a high quality real laser driver to keep this rare diode safe and provide a long life. Many modules sold are paired with cheap LED driver which can result in a significant reduction of life to the diode shocking the diode with harsh switching.
Unit is ready to be dropped into your final project. Just place in a heatsink and power with a 2.5V-6V power source 1A+ capable.
Modules are wired with extremely flexible 26AWG wire that is burn proof and makes for very easy soldering.
Here is what you get. One 55mW Sharp 488nm GH04850B2G laser In Copper Module W/Flexdrive Laser Driver & Your choice of DTR-2E-G, DTR-G-2 or DTR-G-8 Glass Lens.
You can discard the back half if you need the extra room just be car
eful not to let the driver short on anything.:)
Wire assignment is:
Red +
Black -
Specs
Wavelength 488nm +/- 2nm
Input Voltage 2.5V-6V
Driver Output Current 150mA
Driver Current Draw 450mA +/- 0.5A
Power Output 55mW-85mW
Driver Type Constant Current
Duty Cycle Continuous with proper heatsinking for the module
Sharp 488nm GH04850B2G 55mW Laser Diode.
12 Random samples tested from this batch range from 486nm to 492nnm.
Wavelength Test
Diode #1 486.8nm at 55 mA
Diode #2 487.4nm at 70 mA
Diode #3 487.2nm at 55 mA
Diode #4 488.3nm at 130 mA
Diode #5 490.3nm at 120 mA
Diode #6 491.8nm at 100 mA
Diode #7 490.7nm at 80 mA
Diode #8 487.6nm at 110 mA
Diode #9 486.9nm at 100 mA
Diode #10 490.0nm at 95 mA
Diode #11 490.2nm at 100 mA
Diode #12 490.8nm at 130 mA
Power test with G-2 Glass lens
*Disclamer*
By purchasing these diodes you are agreeing to the following.
- You are over 18 years of age .
- You understand that these components that are mentioned above are dangerous when not properly assembled into a finished product.
- You will use these as components and properly incorporate them into a finished product.
- You will use these diodes/modules in a safe and responsible manner and for a legal purpose.
- You are legally responsible for the use of these components, improper use of these components or their end products.
- You are legally responsible for any injury to anybody resulting from the use of or assembly of these components or their finished products.
- You Accept this diode/module as a COMPONENT for integration in a system of YOUR OWN design and will be legally responsible from any and all LIABILITIES These Diodes and Modules are sold solely as a component for incorporation into the customer's end products. Therefore, this diode/module is exempt from compliance with the appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete products.